Completed entirely online.

Course Overview

Who Should take this course?

Workers who are only occasionally or unlikely to come into contact with hazardous materials, who do not require OSHA 40 Hour HAZWOPER certification, but are still required to take HAZWOPER training, are best served by taking OSHA 24 Hour HAZWOPER training.

While the OSHA 24 Hour HAZWOPER course provides students with a thorough overview of the equipment available to a HAZWOPER worker, it does not cover the material in the same detail as 40-hour training, nor does it require any hands-on training.

If you take OSHA 24 Hour HAZWOPER training and your job changes, requiring you to have 40 Hour HAZWOPER certification, you can upgrade your 24-hour certificate to a 40-hour certificate by taking the OSHA 16 Hour HAZWOPER Upgrade course. There is no time limit on when the additional 16 hours of training must be added to your 24-hour certificate.

Objectives

The objectives of this course are to meet the Federal OSHA HAZWOPER training requirements of 29 CFR 1910.120(e)(3)(ii) or 29 CFR 1910.120(e)(3)(iii) for General Industry, and 1926.65(e)(3)(ii) or 1926.65(e)(3)(iii) for Construction. This course is also intended to meet any HAZWOPER training requirements for EPA and State OSHA regulations.

Per 29 CFR 1910.120(e)(3)(ii) and 1926.65(e)(3)(ii)

Workers on site only occasionally for a specific limited task (such as, but not limited to, ground water monitoring, land surveying, or geophysical surveying) and who are unlikely to be exposed over permissible exposure limits and published exposure limits shall receive a minimum of 24 hours of instruction off the site, and the minimum of one day actual field experience under the direct supervision of a trained, experienced supervisor.

Per 29 CFR 1920.120(e)(3)(iii) and 1926.65(e)(3)(iii)

Workers regularly on site who work in areas which have been monitored and fully characterized indicating that exposures are under permissible exposure limits and published exposure limits where respirators are not necessary, and the characterization indicates that there are no health hazards or the possibility of an emergency developing, shall receive a minimum of 24 hours of instruction off the site, and the minimum of one day actual field experience under the direct supervision of a trained, experienced supervisor.

Syllabus

This course consists of 48 sections grouped into 6 modules. Students are required to take each section in sequential order as listed below.

Exams

This course has 6 exams based upon the course's 6 modules. Students are required to complete the exam after completing all course sections. There is no final exam.

Each exam consists of 10 questions randomly selected from a large pool of questions. A 70% score or better is required to pass each exam.

If a student does not pass an exam the first time, they may retake the exam as many times as necessary in order to pass.

Additional Training

 

Students that have taken the 24 Hour HAZWOPER course can upgrade to the 40 Hour HAZWOPER level by taking an additional 16 hours of training. This can be accomplished by taking the 16 Hour HAZWOPER Upgrade course. There is no time limit on when these additional 16 hours can be added to the 24-hour certificate.

Workers must receive additional training, when required by Federal and State OSHA and EPA standards, on the specific hazards of their job.

Training providers should be used to ensure credibility and augment a company's training program. Therefore, in addition to the training provided by an outside party, a student should receive site-specific training that is supplied by their own company. This training should target the company's unique approach to hazard prevention, including the use of site-specific equipment, health and safety policies, and emergency procedures. As a rule, this company specific training should be well documented.


Field Experience

Once workers have completed their 24 hours of training, OSHA requires that worker must get supervised field experience.

Per 29 CFR 1910.120(e)(3)(ii) and 29 CFR 1926.65(e)(3)(iii)

Workers on site only occasionally for a specific limited task (such as, but not limited to, ground water monitoring, land surveying, or geophysical surveying) and who are unlikely to be exposed over permissible exposure limits and published exposure limits shall receive a minimum of 24 hours of instruction off the site, and the minimum of one day actual field experience under the direct supervision of a trained, experienced supervisor.

Many people mistakenly think this is part of their initial training and it is NOT. The one-day requirement of direct supervision has nothing to do with the training requirement. This requirement is meant to ensure that newly trained employees are not sent to a work site and left unsupervised but rather get supervised field experience for at least one day. It is not part of their training period; it is part of their job function period.

While we have found that most employers do not document this field experience, we have created a form that employers can use to document this field experience:

The bottom line in ALL SITUATIONS is that employers are required to ensure that their employees are adequately trained to do their job.

Mobile Version

We're excited to announce that this course is available in HTML 5, making it more compatible with the browser on your mobile device (e.g., smartphone or tablet).

This course requires only the most recent version of your mobile device's web browser.

Mobile Pros and Cons

Mobile versions of this sort of training are new, but below are some Pros and Cons that we have noticed during our extensive testing.

Pros

  • No computer needed
  • Tablet mobility
  • Tablet screen graphics

Cons

  • Smartphone screens can be too small to see
  • Mobile browsers react differently than computer browsers
  • Phone calls can interrupt training

During our testing we noticed that tablets work much better than smartphones, simply due to their screen size. The newer the device, the better the result. We are also aware that the course will not work on the first generation iPad, nor older Android Tablets.


Test the functionality of your browser using HTML5 and compare it to the performance of other browsers. If you find other browsers are more compatible than your own, you may want to make the switch.

FAQ

Below are some frequently asked questions specific to this course.

Q - If I have had the 24 Hour HAZWOPER training and want to upgrade to the 40 Hour HAZWOPER, do I need to take the entire training over again?

A - No, students that have taken the 24 Hour HAZWOPER course can upgrade to the 40 Hour HAZWOPER level by taking an additional 16 hours of training. This can be accomplished by taking the 16 Hour HAZWOPER Upgrade.


Q - How much time do I have after completing the 24 Hour HAZWOPER training before I must upgrade to the 40 Hour HAZWOPER level?

A - There is no specified time limit within the OSHA regulation. However, it is important that students have completed yearly refresher training sessions.


Q - In reference to the requirement for employees to have "a minimum of one day actual field experience under the direct supervision of a trained experienced supervisor," per the HAZWOPER regulation, can I do some of my training during that time?

A - The one-day requirement of direct supervision has nothing to do with the training requirement. This requirement is meant to ensure newly trained employees are not sent to a work site and left unsupervised but get supervised field experience for at least one day. It is not part of their training period; it is part of their job function period.


Q - How long will this course take to complete?

Our courses are set up to take a specific amount of time. Some students may get through the training more quickly, while others may actually take longer to complete their training. Remember, this training should be used as an intricate tool in the context of an overall training program; it can be combined with other training throughout the year in order to meet any hour requirements needed.


Q - How long do I have to start a course once enrolled?

Students have 12 months to start their training from the time they enroll in an online course.


Q - How long do I have to complete a course once started?

Take up to 12 months to complete your online training, at your own pace and schedule.


Q - Do I have to finish the course in one sitting?

No, our courses are designed so you can start and stop as needed, allowing you to break the training up over a longer period of time. Our system will keep track of your progress, enabling you to resume where you left off upon your next login. It is important that once you start a section, you complete that section or you will need to start that section over from the beginning upon your return.


Q - Can I take the course from more than one computer?

Yes, you can take the online portion by signing in with your username and password from any location and computer with high-speed internet access. However, each computer does need to meet our basic system requirements for viewing our online courses.


Q - Will I receive a certificate for this course?

Yes, once you have completed a course, you are able to download, save or print a certificate of completion from your student account. Certificates are created in a pdf format. Users must have the latest version of Adobe Acrobat Reader before attempting to download the completion certificate.